Author Topic: Wi-Fi keeps scanning / not working after WD installation  (Read 1922 times)

Offline JustinCase

  • An Agent of the System...
  • Global Moderator
  • SuperHero Member
  • *****
  • Posts: 3136
  • Country: kp
  • Here since WD 3.x
    • View Profile
    • Whited00rDev
  • Device: iPhone 2G
  • My Computer: Windows
Wi-Fi keeps scanning / not working after WD installation
« on: November 25, 2013, 01:42:24 AM »
Hi there forum users,

Some WD users reported Wi-Fi failure after installing 4.x-6.x to their devices. I would like to clarify that this is not the fault of Whited00r. Whited00r supported devices are /old/ and Wi-Fi antennas do not last forever.

If you are experiencing trouble with your Wi-Fi after installing Whited00r:

1. Ensure that you did not restore from a backup in iTunes afer restoring to whited00r (in order to get your data back)
2. Rebooted twice
3. Ensure that you have not installed any tweaks or done any file system mods that may cause the problems
4. Restore to stock 3.1.3 to see if you still have an issue

* If you are still having issues after restoring to a stock apple firmware then you are experiencing a hardware issue. This is not the fault of Whited00r. Your device either needs repair or to be replaced.

WD PSA #1 (im going to start numbering these :P)
- JustinCase
I get on every now and then to check up
Go ahead and download Whited00r 8 BETA if you haven't yet: http://goo.gl/AFZIUT <------